00136579_0
Shut-off damper Type AK-Ex


00135111_0
ATEX-Zertifizierung


00130917_0
ATEX-compliant parts and units


00136579_0
00135111_0
00130917_0

AK-EX  

FOR LOW-LEAKAGE SHUT-OFF OF VOLUME FLOWS IN POTENTIALLY EXPLOSIVE ATMOSPHERES (ATEX)

Circular shut-off dampers for shutting off ducts, approved and certified for potentially explosive atmospheres (ATEX)


  • ATEX-compliant construction and parts
  • Approved for all gases, mists and vapours in zones 1 and 2, with electric actuator additionally for dusts in zones 21 and 22
  • Suitable for supply air and extract air
  • Electric or pneumatic actuator
  • Any installation orientation
  • Closed blade air leakage according to EN 1751, up to class 4
  • Casing air leakage according to EN 1751, class C Optional equipment and accessories
  • Spring return actuator
  • Auxiliary switch with adjustable switching points for capturing the end positions

General information 

Application
  • Circular EXCONTROL shut-off dampers Type AK-Ex for shutting off or restricting the airflow in ventilation ducts of air conditioning systems
  • For use in potentially explosive atmospheres (ATEX)
  • Input signal to control shut-off damper blade is to be provided by others

Attachments

  • Electronic actuator:
  • Auxiliary switch for capturing the end positions
  • Pneumatic actuator

Construction features
Special features

  • ATEX mark and certification
  • ATEX equipment group II, approved for use in zones 1 and 2; electric actuator also for zones 21 and 22
  • Circular casing
  • Construction and materials comply with the EU directive for use in potentially explosive atmospheres (ATEX)
  • Spigot with lip seal, for circular connecting ducts according to EN 1506 or EN 13180Technical data

Nominal sizes

  • 125, 160, 200, 250, 315, 400

Nominal sizes
  • 125, 160, 200, 250, 315, 400

Construction

  • Galvanised sheet steel
  • P1: Inner duct powder-coated, silver grey (RAL 7001)
  • A2: Inner duct in stainless steel


Parts and characteristics
  • Ready-to-install shut-off damper
  • Damper blade with blade mechanism
  • Connection for equipotential bonding
  • Cable bushings suitable for use in potentially explosive atmospheres
  • ATEX-compliant actuator is factory assembled and wired
  • Nominal sizes: 125 – 400 mm
  • Acceptable static differential pressure: 1500 Pa

Standards and guidelines
  • Directive 94/9/EC: Equipment and protective systems intended for use in potentially explosive atmospheres
  • Closed blade air leakage according to EN 1751, class 4 (nominal sizes 125 and 160, class 3)
  • Nominal sizes 125 and 160 meet the general requirements, nominal sizes 200 – 400 meet the increased requirements of DIN 1946, part 4, with regard to the acceptable closed blade air leakage
  • Casing air leakage according to EN 1751, class CMaintenance
  • Maintenance-free, as construction and materials are not subject to wear and tear

Téléchargements

Information produit

Certificats

Manuels d'utilisation

production {"x-frame-options"=>"SAMEORIGIN", "x-xss-protection"=>"1; mode=block", "x-content-type-options"=>"nosniff", "x-download-options"=>"noopen", "x-permitted-cross-domain-policies"=>"none", "referrer-policy"=>"strict-origin-when-cross-origin", "strict-transport-security"=>"max-age=31536000; includeSubDomains", "content-type"=>"text/html; charset=utf-8"}

Partager la page

Recommander cette page

Recommander cette page en envoyant un lien par mail.

Les champs marqués d'un (*) sont obligatoires.

Partager la page

Merci pour votre recommandation !

Votre recommandation a été envoyée et devrait arriver dans les plus brefs délais.

Contact

Nous sommes à votre disposition

Veuillez préciser votre message et le type de demande
Tel.: +32 (0) 2/522 07 80

Les champs marqués d'un (*) sont obligatoires.

Contact

Merci pour votre message !

Votre message a été envoyé et sera traité dans les plus brefs délais.
Notre département de traitement des demandes prendra contact avec vous dès que possible.
Pour les questions d'ordre général concernant les produits ou services, vous pouvez aussi nous appeler :
Tel.: +32 (0) 2/522 07 80

Contact

Nous sommes à votre disposition

Veuillez préciser votre message et le type de demande
Tel.: +32 (0) 2/522 07 80

Pièce jointe (max. 10MB)

Les champs marqués d'un (*) sont obligatoires.

Contact

Merci pour votre message !

Votre message a été envoyé et sera traité dans les plus brefs délais.
Notre département de traitement des demandes prendra contact avec vous dès que possible.
Pour les questions d'ordre général concernant les produits ou services, vous pouvez aussi nous appeler :
Tel.: +32 (0) 2/522 07 80