Orion-LØV with Sirius

  • Unique damper function
  • Extensive working range
  • Belimo MP-Bus
  • Modbus
  • LONWORKS
  • Belimo KNX
  • Application
  • Description
  • Installation
Orion-LØV with Sirius is a diffuser unit with VAV function, and is used as volume flow controller and diff user in ventilation systems to enable air flow rates to be set as per requirements. Orion-LØV offers excellent induction, and is ideal for variable air flow rates.
 
Design
 
Orion-LØV with Sirius is a complete measuring and control unit where the air flow rates in ventilation systems can be set as required. At the measuring station, the differential pressure is measured by using measuring rods integrated in the unit. Sirius is equipped with LHV-D3 V AV controller from Belimo. Controller specifications are provided in the table below. Full technical documentation can be downloaded from www.belimo.eu. Orion-LØV features a removable front panel with LØV perforation, and is suitable for a range of ceiling systems.
 
Materials and surface coating
 
Sirius comes in a galvanised steel design. The measurement unit is in aluminum, and hoses and nipples are in plastic. The damper is equipped with polyester material, and the connection collar is fitted with EPDM rubber gasket.
 
The Orion-LØV diffuser can be installed in a range of modular ceiling systems as well as in fixed ceilings. Sirius is attached to the rear of the support bracket by means of threaded rod or strap (fig. 5). In order to maintain the system’s measurement accuracy, it is important to install units with spacing as shown in fig. 6.

Technische informatie

  • Order Code
  • Quick Selection
  • Function
Orion-LØV with Sirius has a built-in VAV controller for adjustment of air fl ow rates according to requirements. The damper solution will choke the pressure at high fl ow rates and will maintain a low sound level. This may reduce the need for additional dampers and sound attenuators in a duct system. Orion-LØV with Sirius forms part of the VIP-X control system for VAV, and is also available with Winsta plug-in wiring system. Motion detector can be integrated in the diff user front. Orion-LØV with Sirius can also be delivered with Belimo MP-Bus, LON, Modbus or Belimo KNX for direct BUS communication to SD systems. 

Deviation for working range 10 - 20% of Vnom:±25%
20 - 40%: of Vnom <±10%
40 - 100%: of Vnom <±4%

If T-pipes are used, a spacing of at least 5 x ØD is recommended in order to maintain the measurement accuracy.

The diffusor front can be supplied with integrated motion sensor or motion/temperature sensor. Motion/temperature sensor is only to be used together with X-AIRCONTROL.                      Product sheet for Motion sensor and motion/temperature sensor can be found on our website: www.trox.no

Pagina delen

Deze pagina aanbevelen

Hier kunt u deze pagina als link aanbevelen.

Met (*) gemarkeerde velden zijn verplicht.

Contact

Dank u voor uw bericht

Uw aanbeveling is verzonden en zou direct bij de ontvanger moeten binnenkomen.

Contact

Wij zijn er voor u

Visual contact Visual contact

Wilt u het onderwerp van uw aanvraag en uw contactgegevens specificeren a.u.b.
Tel.: +32 (0) 2/522 07 80

Met (*) gemarkeerde velden zijn verplicht.

Contact

Bedankt voor uw aanvraag

Visual contact Visual contact

Uw aanvraag is door ons ontvangen en wordt behandeld.
Onze afdeling voor service-aanvragen zal op korte termijn contact met u opnemen.
Voor algemene vragen over producten en diensten kunt u ons ook bereiken op:
Tel.: +32 (0) 2/522 07 80

Contact

Wij zijn er voor u

Visual contact Visual contact

Wilt u het onderwerp van uw aanvraag en uw contactgegevens specificeren a.u.b.
Tel.: +32 (0) 2/522 07 80

Attachment (max. 10MB)

Met (*) gemarkeerde velden zijn verplicht.

Contact

Bedankt voor uw aanvraag

Visual contact Visual contact

Uw aanvraag is door ons ontvangen en wordt behandeld.
Onze afdeling voor service-aanvragen zal op korte termijn contact met u opnemen.
Voor algemene vragen over producten en diensten kunt u ons ook bereiken op:
Tel.: +32 (0) 2/522 07 80