00136694_0
KU-K30
00132715_0
Tested to VDI 6022
00132450_0
With TROXNETCOM as an option
00136623_0
KU-K30 with diffuser of Type DLQ

Lindner ceiling tile (by others)
Diffuser (to be ordered separately)

00136694_0
00132715_0
00132450_0
00136623_0

KU-K30         

For diffusers in suspended F30 ceilings

Square fire damper for installation in suspended fire-resistant F30 ceilings For the isolation of duct penetrations between fire compartments, available in five nominal nominal sizes

  • Nominal sizes for diffusers sized 300 × 300 – 625 × 625 mm
  • Satisfies high ventilation requirements when combined with a diffuser
  • Coated construction meets high hygiene requirements
  • Integration into the central BMS with TROXNETCOM


Optional equipment and accessories

  • Ceiling diffusers/swirl diffusers
  • External fusible link, 72 °C
  • Electric actuator
  • Release temperature 72/95 °C

Application

Application

  • Fire dampers of Type KU-K30 for the isolation of air terminal devices in self supporting fire-resistant suspended ceilings in the event of a fire
  • To prevent the propagation of fire and smoke through ductwork to adjacent designated fire compartments

Special characteristics

  • Licence Z-41.3-320
  • Tested to DIN 4102-6 for fire resistance properties
  • Classification to DIN 4102, K30-U
  • Low differential pressure and sound power level
  • For use with supply air or extract air systems (for supply air systems with perforated sheet metal)
  • Integration into the central BMS with TROXNETCOM

Classification

  • Fire resistance class K30-U to DIN 4102-6

Nominal sizes

  • Fire damper: 300 × 300, 400 × 400, 500 × 500, 600 × 600, 625 × 625 mm
  • Spigot Ø (depending on the nominal size): 160, 200, 250, 315 mm

Description

Variants

  • With fusible link
  • With spring return actuator

Parts and characteristics

  • Release temperature 72 °C or 95 °C (for use in warm air ventilation systems)

Attachments

  • Limit switch for damper blade position indication
  • Spring return actuator for 24 V or 230 V supply voltage
  • External fusible link

Useful additions

  • Diffuser: FD, TDF-SilentAir, DLQ or ADLQ

Construction features

  • Casing made of calcium silicate
  • Damper blade made of special insulation material

Materials and surfaces

Plenum box:

  • Special insulation material
  • Special insulation material with RAL 7001 coating on the inside


Damper blade:

  • Special insulation material
  • Special insulation material with RAL 7001 coating
  • Seal made of neoprene


Other components:

  • Spigot and attachments made of galvanised sheet steel
  • Fixing elements made of galvanised steel

Standards and guidelines

  • DIN 4102-6, standard fire resistance test
  • EN 1751 Ventilation for buildings – Air terminal devices

Maintenance

  • The functional reliability of the fire damper must be tested at least every six months; this has to be arranged by the owner of the ventilation system; functional tests must be carried out in compliance with the basic maintenance principles stated in EN 13306 and DIN 31051. If two consecutive tests, one 6 months after the other, are successful, the next test can be conducted one year later
  • A functional test involves closing the damper blade and opening it again; with a spring return actuator this can be done via remote control
  • Fire dampers must be included in the regular cleaning schedule of the ventilation system.
  • For details on maintenance and inspection refer to the installation and operating manual

Information technique

  • Function
  • Technology
  • SPECIFICATION TEXT
  • Order code
Construction with fusible link

Functional description

Fire dampers for self supporting F30 suspended ceilings shut automatically in the event of a fire and prevent the propagation of fire and smoke through ductwork to adjacent designated fire compartments. In the event of a fire, the damper is triggered at 72 °C or at 95 °C (use in warm air ventilation systems) by a fusible link inside the damper. The release mechanism is accessible and can be tested from the outside (i.e. from the room).

Construction with spring return actuator

Functional description

The spring return actuator enables the motorised opening and closing of the damper blade; it can be activated by the central BMS.

In the event of a fire, the damper is triggered thermoelectrically at 72 °C or 95 °C (use in warm air ventilation systems).

As long as power is supplied to the actuator, the damper blade remains open.

If the supply voltage fails, the damper closes (power off to close).

Motorised fire dampers can be used to shut off ducts.

The torque of each actuator is sufficient to open and close the damper blade even while the fan is running.

The spring return actuator is fitted with limit switches that can be used for capturing the damper blade position.

Nominal sizes – fire damper300, 400, 500, 600, 625 mm
Nominal sizes – spigot160, 200, 250, 315 mm
Differential pressure rangeDepends on the spigot and diffuser
Operating temperatureAt least 0 – 50 °C **
Release temperature72 °C or 95 °C (for warm air ventilation systems)
Upstream velocityDepends on the spigot and diffuser, usually about 3 – 5 m/s

** Temperatures may differ for units with attachments


Square fire damper for the isolation of ducts in self supporting fire-resistant suspended ceilings. Satisfies high ventilation requirements when combined with a non-combustible ceiling diffuser or swirl diffuser. Suitable for supply and extract air

Ready-for-operation unit, which includes a fire-resistant damper blade and a release mechanism. Fire resistance class: K30-U

For installation in self supporting F30 fire-resistant suspended ceilings: tile ceilings (screw-fixed or primed), metal ceilings, and gypsum friezes of metal ceilings.

Thermal or thermoelectric release at 72 °C or 95 °C (warm air ventilation systems).

Constructions with spring return actuator for opening and closing the fire damper independent of the nominal size and even while the ventilation system is running, e.g. for a functional test.

Special characteristics

  • Licence Z-41.3-320
  • Tested to DIN 4102-6 for fire resistance properties
  • Classification to DIN 4102, K30-U
  • Low differential pressure and sound power level
  • For use with supply air or extract air systems (for supply air systems with perforated sheet metal)
  • Integration into the central BMS with TROXNETCOM

Materials and surfaces

Plenum box:

  • Special insulation material
  • Special insulation material with RAL 7001 coating on the inside


Damper blade:

  • Special insulation material
  • Special insulation material with RAL 7001 coating
  • Seal made of neoprene


Other components:

  • Spigot and attachments made of galvanised sheet steel
  • Fixing elements made of galvanised steel

Technical data
  • Nominal sizes – fire damper: 300, 400, 500, 600, 625 mm
  • Nominal sizes – spigot: 160, 200, 250, 315 mm
  • Differential pressure range: Depends on the spigot and diffuser
  • Operating temperature: at least 0 – 50 °C **
  • Release temperature 72 °C or 95 °C (for use in warm air ventilation systems)
  • Upstream velocity: Depends on the spigot and diffuser, usually about 3 – 5 m/s

** Temperatures may differ for units with attachments

Life cycle assessment
A life cycle assessment is available for the product series in form of an Environmental Product Declaration (EPD) that has been checked and published by a programme holder.

00219987_0

 Type
KU-K30
L-KU-K30¹

Construction 1
       No entry: standard construction
1       With RAL 7001 coating
LB       With perforated sheet metal
1-LB       With RAL 7001 coating and perforated sheet metal

Construction 2
W       Release temperature 95 °C

 Nominal size [mm] – fire damper²
300
400
500
600
625

 

Nominal size [mm] – spigot
160
200
250
315

 Attachments
Z00       Standard construction
Z00 – ZL08


¹ Type L-KU-K30: For Lindner metal ceilings LMD F30 Type 1, 3, 4, 5 and 6 – 11, with building inspectorate licence
² Types DLQ ּ ADLQ can only be combined with selected nominal sizes

Diffuser types (to be ordered separately)
FD
TDF-SilentAir
DLQ
ADLQ

 

Téléchargements

Information produit

Certificats

production {"X-Frame-Options"=>"SAMEORIGIN", "X-XSS-Protection"=>"1; mode=block", "X-Content-Type-Options"=>"nosniff", "X-Download-Options"=>"noopen", "X-Permitted-Cross-Domain-Policies"=>"none", "Referrer-Policy"=>"strict-origin-when-cross-origin", "Content-Security-Policy"=>"frame-ancestors 'self' https://api.scrivito.com https://punchoutcommerce.com https://www.trox.de https://trox-extern.com https://psp40.onventis.com https://psp22.onventis.com https://trox4u.troxgroup.com", "Strict-Transport-Security"=>"max-age=31536000; includeSubDomains", "Content-Type"=>"text/html; charset=utf-8"}

Partager la page

Recommander cette page

Recommander cette page en envoyant un lien par mail.

Les champs marqués d'un (*) sont obligatoires.

Partager la page

Merci pour votre recommandation !

Votre recommandation a été envoyée et devrait arriver dans les plus brefs délais.

Contact

Nous sommes à votre disposition

Veuillez préciser votre message et le type de demande
Tel.: +32 (0) 2/522 07 80

Les champs marqués d'un (*) sont obligatoires.

Contact

Merci pour votre message !

Votre message a été envoyé et sera traité dans les plus brefs délais.
Notre département de traitement des demandes prendra contact avec vous dès que possible.
Pour les questions d'ordre général concernant les produits ou services, vous pouvez aussi nous appeler :
Tel.: +32 (0) 2/522 07 80

Contact

Nous sommes à votre disposition

Veuillez préciser votre message et le type de demande
Tel.: +32 (0) 2/522 07 80

Pièce jointe (max. 10MB)

Les champs marqués d'un (*) sont obligatoires.

Contact

Merci pour votre message !

Votre message a été envoyé et sera traité dans les plus brefs délais.
Notre département de traitement des demandes prendra contact avec vous dès que possible.
Pour les questions d'ordre général concernant les produits ou services, vous pouvez aussi nous appeler :
Tel.: +32 (0) 2/522 07 80