Type KSFS

Fitting of filter elements for the separation of suspended particles in areas with critical requirements

 

Ducted particulate filters for Mini Pleat filter panels, Mini Pleat filter cells, and activated carbon filter cells. For installation into the ductwork of ventilation systems. Used in medicine, biology, pharmaceuticals, and sensitive technical areas.

  • Ducted particulate filter made of sheet steel with decontaminable powder coating RAL 9010 and clamping mechanism made of stainless steel
  • Robust, welded construction with doubled-edged perimeter flanges with pre-drilled holes ensures secure sealing
  • One-stage or two-stage casing, for the fitting of fine dust filters as prefilter stage and of particulate filters as second filter stage
  • Secure sealing and convenient handling due to tensioning lever for a consistent contact pressure and hence the sealing integrity between the casing and filter element
  • With sealing integrity test facility for filter elements


Optional equipment and accessories

  • Optional double-groove service board for contamination-free filter change ('safe change')
  • Plastic service bag with cord ring for contamination-free filter change
small_tab1_Serie KSFS
  • Application
  • Description

Application

  • Ducted particulate filter type KSFS for critical requirements
  • Casing for duct installation
  • Fitting of filter elements for the separation of suspended particles such as aerosols, toxic dusts, viruses and bacteria from the supply or extract air
  • Fitting of activated carbon filter cells for the separation of gaseous odorous substances and contaminants from the supply and extract air

Variants

  • M: Casing without prefilter
  • PM: Casing with prefilter

Construction

  • SPC: Steel, powder-coated RAL 9010, pure white
  • STA: Stainless steel

Options

  • MD: Casing with double-groove service board

Accessories

  • Plastic service bag with cord ring

Useful additions

  • Suitable filter elements to be ordered separately
  • Mini Pleat filter panels (MFP)
  • Mini Pleat filter cells (MFC)
  • Activated carbon filter cells (ACF)
  • Other filter elements upon request
  • Spigot (KSFSSP)

Construction features

  • Casing with robust, doubled-edged connecting flanges with pre-drilled holes.
  • Automatically adjusting clamping mechanism which guarantees sealing integrity between the casing and the filter element; this clamping mechanism can only be closed when the filter element is properly seated
  • Cover plate with profiled seal and four clamping screws with star grips
  • Prefilter casing for fitting Mini Pleat filter panels as fine dust filters
  • Double-groove service board and plastic service bag for contamination-free filter change
  • Sealing integrity test facility for Mini Pleat filter panels as particulate filters
  • Casing with indentations to ensure the precise fitting of the filter elements
  • Leakage test for each individual casing

Materials and surfaces

  • Casing made of sheet steel, powder-coated RAL 9010, pure white, or of stainless steel
  • Stainless steel clamping mechanism

Information technique

  • Function
  • Specification text
  • Order code
ksfs

 

Ducted particulate filters KSFS for critical requirements as filter casings for installation into the ductwork of ventilation systems.

Fitting of filter elements for the separation of suspended particles such as aerosols, toxic dusts, viruses and bacteria from the supply or extract air; also for the fitting of activated carbon filter cells for the adsorption of gaseous odorous substances and contaminants.

Filter casings are available as one-stage construction or two-stage construction for the fitting of fine dust filters as prefilter stage and of particulate filters as second filter stage. Ducted particulate filter KSFS with robust, doubled-edged connecting flanges with pre-drilled holes.

Clamping mechanism made of stainless steel with tensioning lever for uniform sealing integrity between the casing and filter element. Filter casing with sealing integrity test facility, available with optional double-groove service board and plastic service bag for contamination-free filter change.

The cover plate is fitted with a profiled seal and four clamping screws with star grips. Pressure measurement points are part of the supply package but must be set up on site by others.

Leakage test for each casing.

Materials and surfaces

  • Casing made of sheet steel, powder-coated RAL 9010, pure white, or of stainless steel
  • Stainless steel clamping mechanism

Construction

  • SPC: Steel, powder-coated RAL 9010, pure white
  • STA: Stainless steel
ksfs

Partager la page

Recommander cette page

Recommander cette page en envoyant un lien par mail.

Les champs marqués d'un (*) sont obligatoires.

Partager la page

Merci pour votre recommandation !

Votre recommandation a été envoyée et devrait arriver dans les plus brefs délais.


Contact

Nous sommes à votre disposition

Visual contact Visual contact

Veuillez préciser votre message et le type de demande
Tel.: +32 (0) 2/522 07 80

Les champs marqués d'un (*) sont obligatoires.

Contact

Merci pour votre message !

Visual contact Visual contact

Votre message a été envoyé et sera traité dans les plus brefs délais.
Notre département de traitement des demandes prendra contact avec vous dès que possible.
Pour les questions d'ordre général concernant les produits ou services, vous pouvez aussi nous appeler :
Tel.: +32 (0) 2/522 07 80

Contact

Nous sommes à votre disposition

Visual contact Visual contact

Veuillez préciser votre message et le type de demande
Tel.: +32 (0) 2/522 07 80

Pièce jointe (max. 10MB)

Les champs marqués d'un (*) sont obligatoires.

Contact

Merci pour votre message !

Visual contact Visual contact

Votre message a été envoyé et sera traité dans les plus brefs délais.
Notre département de traitement des demandes prendra contact avec vous dès que possible.
Pour les questions d'ordre général concernant les produits ou services, vous pouvez aussi nous appeler :
Tel.: +32 (0) 2/522 07 80